Loft bunk bed with desk – First, measure and cut timber. If the frame of the loft, you need four 4 x 4 posts (6 ft long); to 2 x 8 pieces about 87 in. long; and two 2 x 8 pieces of 48 inches long.If the desktop, two pieces of 2 x 8 lumber, each about 48 inches long; and a piece of high-quality half-inch plywood is cut 75 inches wide and 25 inches deep.
Second steps to build loft bunk bed with desk, start with 4 x 4 posts. Draw a line across the post 12 inches from the top of each table. On the opposite side of each post, mark locations for drilling holes in the lines you’ve drawn. Place your drilled holes in a diagonal pattern. Drill your holes and attach your side boards with layers bolts, washers and nuts. Attach your head and foot boards. Mark wells (diagonal pattern) on the adjacent side of the 4 x 4, 8 x +2 side boards.
24 Photos Gallery of: Build Loft Bunk Bed With Desk
Drilling holes through the 4 x 4 x 2 x 8 main board and foot board. Attach boards with layers bolts, washers and nuts. You have just built the frame for your loft. Standing in the bed on the foot and put 39 x 75 inches of plywood across the frame. Fasten with wood screws to safety. Last, build desktop. Dimensions on the inside of each leg 4 x 4, and draw a line about 28 in. From the floor. Your loft bunk bed with desk finished.